MiniTest
An accurate, single-port Pulsation and Vacuum Tester using the same measurement system as the DairyTest range. A simple 3-digit display with function indicators is great for quick checks of Pulsator operation and vacuum levels. All Pulsation parameters are available in both % and ms where appropriate. Long battery life a fast operation make MiniTest and ideal unit to keep in the truck. Uses InnovAg’s digital calibration system with no manual adjustments for excellent long-term accuracy.
The MiniTest is a handheld single-port digital instrument for testing vacuum supplies and pulsators in dairies.
With a large, easy-to-read 3-digit display, MiniTest uses the same high-accuracy analysis as our other
testers, but in a smaller, lighter, lower-cost format.
The MiniTest is intended for use by
personnel with technical knowledge of dairy operation as an accessory to a professional test kit; for
example, for bench-testing of pulsators or to do a quick check on the dairy’s performance. It is ideal for
veterinarians and field professionals who need to check dairy operation without the cost or complexity of a
fully featured tester.
It has only a single vacuum port and cannot be connected to a PC or
printer.
MiniTest Kit contains:
- test tubing
- AA Alkaline batteries
- carry case
- manual
Display:
3 digit x 7 segment LCD
Vacuum
- Maximum, average or minimum.
Pulsation
- Ratios – A+B, B, C, D in % or ms
- Rate – CPM
- MaxVac
- B-Phase drop – B flashes if more than 4kPa drop in B-phase
- Stability – Avg flashes until values settle to ISO requirements
Pulsation:
Rate range: 40 to 500 CPM.
Rate accuracy: ± 2%.
Ratio
accuracy: ± 2% of calculated value.
Time (ms) accuracy: ±
2%.
Vacuum:
Range: +10 to -80 kPa at 1 atm.
Accuracy: ± 0.5
kPa
Repeatability: ± 0.3 kPa
Resolution: 0.1 kPa
General:
Sample rate: 1000 samples/sec.
Operating temperature: 5 to
40°C
Storage temperature: 0 to 60°C
Automatic turn-off time: 10 minutes after last key
press
if no vacuum on port.
Batteries: two ‘AA’ Alkaline or NiCd/NiMH rechargeable
cells.
Specifications are subject to change without notice.
ALL
InnovAg testers include:
- Digital calibration with certificate supplied.
- Re-calibration service available.
- Selectable units: Vacuum – kPa & inHg, Pulsation ratios (where included) – % and ms.
- Pulsation measurements (where included) conform to ISO standard with stability indication.
- Auto power off and low battery indication.
- Automatic vacuum zero (with manual zero if required).
Why is the VAC/PUL light flashing?
The batteries are getting low.
How do I reset the MiniTest's zero?
Turn the unit on. Select VAC mode.
Press and
hold the VAC/PUL key. After about 5 seconds both the VAC or PUL lights will turn on. Do not release the key
yet. Press both the I/O and the play key. The PUL light should go off indicating the manual zero has been
accepted. Release all keys and check the display shows 0.0.
What if I need to return my product?
Please complete the contact form so that innovAg may help you with
your concern.
|
|
Internal tube & filter kit |
