innovAg's Multicontrol Pulsation Controller

MultiControl Pulsation Controller

  • $2,550.00


Controls up to 3 banks of Pulsators with adjustable Rate and Ratio. Multiple banks lowers the load on the Dairy vacuum supply compared to a single drive system. Fault-protected 2x2 outputs shut off during overload, over/under voltage and wiring shorts to prevent damage. Three tri-colour LEDs show the status of each bank. Can be configured to automatically start on power up or from an external closed contact. Requires and external 12V or 24V power supply.

MultiControl is an innovative range of high-technology dairy controllers that are highly reliable, economical, versatile and easy to set up.

The pulsation controller comes with built-in 12VDC or 24VDC switch-mode power supply, which operates three banks of 2x2 pulsators.

Dividing the pulsator drive into three banks lowers the load on the vacuum supply, allows smaller-sized cable and lower voltage drops compared to single or dual bank controllers.

Functional:
Multi-colour front panel LEDs show bank status.
Auto-start on power up or with external input.
Bank outputs protected against shorts (LED shows red).
Inbuilt high-efficiency, protected, switch-mode power supply.

Electrical:
Mains voltage: 85 - 264VAC, 50 or 60Hz.
13.5 or 24VDC output (must specify when ordering).
10 preset Rates (50 to 180 CPM).
10 preset Ratios (50:50 to 70:30).
Bank max. output current: 2.5A/side @ 60CPM, 60:40
            -  up to 10 x 12V@0.27A coils or 20 x 24V@0.13A coils.

Operating temperature: -5 to 40°C.
Storage temperature: -20 to 60°C.

Specifications are subject to change without notice.

How many pulsators can I connect per bank?
For 12V output: up to 10 @0.27A coils
For 24V output: up to 20 @0.13A coils.

What if I need to return my product?
Please complete the contact form so that innovAg may help you with your concern.

user manual